Geothermal Heating and Cooling in Georgetown, Texas

Geothermal System

Geothermal heating and cooling in Georgetown, Texas, is an energy-efficient choice for your house.

Similar to heat pumps, a geothermal system transports warmth from one part of the house to another. It uses an underground loop system to bring heat from the ground to your home.

This geothermal heating and cooling system uses the earth’s stored energy, which can be turned into significant savings on your utility expenses.

As opposed to standard furnaces, the EPA says owners operating geothermal heat pumps can see a return of 70% on heating and up to 50% on cooling your house each year. This indicates you might save approximately $400 to $1,500 every year, which could help your geothermal heating and cooling system yield a full return on your investment in just a few years.

A brand new geothermal system may also enable you to become entitled to energy refunds.

Give our sales staff a phone call at 512-937-2001 and we’ll help you create the correct system for your residence.

CALL TODAY 512-937-2001

8 Benefits of Using Geothermal Energy

Geothermal heating and cooling units are extremely energy efficient and may last twice as long as typical systems. Here’s a few other benefits to putting one of these geothermal heating and cooling systems at your house:

savings icon

1. Energy Savings

Nearly all units are easily three times better than fossil fuel systems. The EPA has calculated geothermal has the potential to save you close to $1,500 every year. This investment may help the geothermal heating and cooling system pay for itself in only a few years.

life span icon

2. Longer Years in Operation

Geothermal systems are likely to outlast commonly used heating and cooling systems, generally because they are buried. You can expect your geothermal heating and cooling equipment to last for many years to come. Gas furnaces and electric heat pumps generally have to be replaced after 15 years.

free hot water icon

3. No Charge for Hot Water

Geothermal creates free hot water. It can lessen your energy usage of hot water up to 60%. Your exact savings will be determined by the total number of occupants and how much hot water your family utilizes.

Not only does the geothermal heating and cooling system create hot water, in various cases it makes “more than free” hot water. This means the equipment in reality becomes more cost-effective when creating hot water.

heating and cooling icon

4. Joined Heating and Cooling Equipment

A system can heat and cool your residence. You won’t need an AC out-of-doors or separate heating system indoors, unless you live in a cold climate. A split heating system is an option in areas where conditions regularly drop below 32 degrees.

humidity control icon

5. Superior Moisture Management

Geothermal retains about 50-50 relative interior dampness, making it very effective in damp areas.

safe icon

6. Improved Safeguards

Since geothermal doesn’t require combustion to supply heat, you don’t have to concern yourself with gas leaks or carbon monoxide.

low maintenance icon

7. Little Repairs

There is less maintenance required with a geothermal system given that there is no open air geothermal equipment. This makes it less at risk for malfunction during the course of scorching summers. Since it doesn’t depend on outside weather, no defrost controls are required as found on a typical heat pump.

quiet icon

8. Quiet Action

Geothermal is the same as anything else you buy in life. Giving not much right now generally indicates you come to have no more in return. Well-made and correctly connected heating and cooling equipment will provide you a lifetime of uninterrupted performance.

Types of Geothermal Heating and Cooling Equipment

Open and closed geothermal loop systems

There are two fundamental types of geothermal equipment: open loop and closed loop.

Because these loops are deep in the earth, first installation will affect your backyard. Nevertheless, the loops won’t be able to be seen once the backyard has returned.

Open Loop Geothermal

Open loop geothermal utilizes groundwater to move hot water. It can be arranged to work with a well, pond or lake.

This geothermal system is usually the most energy efficient due to constant groundwater hot and cold temperatures. Although, it’s not always a possibility because of a lack of groundwater or extreme amount of iron in the groundwater. Local code may also prevent these geothermal systems in your state.

Closed Loop Geothermal

Closed loop geothermal operates a continuous loop to transport water (or antifreeze solution for frigid areas) to the ground and back to the geothermal heating and cooling equipment. The water is recirculated in a pressurized pipe instead of adding new water.

There are some installing selections, for instance horizontal, slinky and vertical.

Reach Out to the Geothermal System Experts at Miller Climate Control LLC

Geothermal equipment is a logical investment in your home. But selecting the correct geothermal equipment and ideal company to install it can feel like a complex process. At Miller Climate Control LLC, we design it to be effortless with expert assistance from our heating and cooling professionals.

Get ahold of us at 512-937-2001 or contact us online to get started as soon as possible.

CALL TODAY 512-937-2001